We offer the following product lines from Illumra: Daylight Sensors, Low Votlage Bi-level Sensors, Os Series Wall And Ceiling, Powr Pack And Controller W/bms, Push Button Switches, Trans Pir Sensors, Wall Senzr Family.
Below is a highlight of a few of the products. For complete information on products please visit IRTEC's website.


The BPD type of the TRANS-LUX sensor family are low voltage daylight sensors designed to provide isolated dry contact with 0-10 V output for on/off switching or continuous dimming control. The BPD-5xx series comes with typical on/off control or SmartDIM continuous dimming control.

The LRD-609SA series of the TRANS-PIR sensor family are two-way IR remote programmable line voltage switching occupancy sensors with 0-10 V output for dimmable ballast or LED driver control. The sensor is capable of providing top-notch energy efficient lighting control in multiple modes with fully programmable multi-level high/low dim or SmartDIM continuous dimming control.

The LRD-609SA series comes with a universal mounting design which provides complete installation flexibility with IP-66 rating. Like all TRANS-PIR sensors, the LRD-609SA series are available with interchangeable lenses

The BRD type of the TRANS-PIR sensor family are two-way IR remote programmable low voltage occupancy sensors with 0-10 V output for dimmable ballast or LED driver control. The sensor is capable of providing top-notch energy efficient lighting control in multiple modes with fully programmable multi-level high/low dim or SmartDIM continuous dimming control

The OS-361DT is a ceiling mount low voltage dual technology occupancy sensor designed for area lighting, or HVAC control, for energy efficient building management. The sensor combines an omni-directional quad element Passive Infrared (PIR) sensor, a state-of-the-art High Frequency Doppler (HFD) sensor and advanced signal processing firmware to perform superior occupancy sensing capability.

The PPU series power packs are designed to supply 24 VDC power for the operation of low voltage occupancy sensors, and switch the line voltage for the connected load control via its heavy-duty isolated relay in response to the signals from connected occupancy sensors. This power pack can be attached to the existing junction box with 1/2" knockout or mounted into fixture cable trays.

The PPU-3xx series is available with specific model featuring different control input for simple connection or sophisticated connection.

The PBD type push-button dimmer switch is a single pole, low voltage push-button dimmer switch designed to fit into a standard NEMA wall box. This sleek, low profile switch provides a momentary contact signal for iR-TEC power pack to manually control the connected lighting, together with an adjustable 0-10V output to dim the light as desired through intuitive button operstaion.

Pluggable type terminal block makes low voltage wiring connection quick and easy. A screwless snap-on Decora wall plate is supplied to create a modern, high-end appearance for all spaces.

The BOA type of the TRANS-PIR sensor family are low voltage occupancy sensors to provide multi-mode bi-level control of LED lighting with 0-10 V analog output.

All TRANS-PIR sensors are available with various mounting options and interchangeable lenses.

The BBS type of the WALLSENZR family are low voltage wall switch sensors designed to provide isolated dry contact output for load switching via the connected PPU or BMS. Sensor setting and control mode can be configured by Accu-Set pot and DIP switch behind the button cover.

The BBS-7xx series features models with standard modes settings, or with Multi-way Manual control.